Silver Queen  Stoneworks
Hand holding a translucent amber agate slice with a cream center and dark rim, up to the light

Where Nature Becomes Art

One-of-a-kind gemstone jewelry and hand-cut stone from a one-man workshop in Lewiston, Idaho.

The stone in this photo is the exact slab for sale — not a stock picture of one like it.

One of a kindEvery piece is the only one. When it sells, it’s gone.
$7 flat shippingAnywhere in the US and Canada.
Free over $100Orders over $100 ship free.
Cut by handRough to finished in one workshop in Lewiston, Idaho.

Featured pieces

Three stones off the bench. The photo is the piece — buy it and that exact stone is what ships.

Green teardrop malachite necklace with curved bands on a gold-colored chain

Malachite Necklace

$35

Deep green bands curve around the face of this teardrop pendant. A lighter sweep of green follows the polished edge.

See this stone
Hand holding a translucent amber agate slice with a cream center and dark rim

Brazilian Agate Slab

$15

Hold this slice up to the light and its amber bands frame a broad cream center. The dark outer rind traces the edge of the original stone.

See this stone
Hand holding a faceted fluorite tower with blue, green and purple bands

Rainbow Fluorite Tower

$10

Violet, blue and green run across the faces of this polished point. A pale band cuts across the darker colors near the base.

See this stone

There isn’t a second one. Each listing is a single stone. If a featured piece has sold, the shop still holds the rest of the shelf — browse everything.

Shop the shelf

The full catalog lives in the shop — necklaces, towers, slabs, and specimens, each one photographed as itself.

From the bench

From the bench — the stones I’m arguing with, and what I did about them.

Some stones are easy. Some sit on the bench while I turn them in the light and argue with myself about where the saw should go — or whether it should go at all. That’s what the journal is for.

Read From the Bench →

Latest: What do you see in this band?

A Brazilian agate slab, cut and polished here in the shop. Held up to the light, the banding runs all the way through it.

“Look close first. Then look at the whole stone.”

Read the entry

The lapidary

I’m the lapidary behind Silver Queen Stoneworks in Lewiston, Idaho. I find the rough stone, cut it, and polish it myself. When a stone becomes a necklace, I set it myself, too. Two cuts from the same rock can reveal different patterns. When a piece sells, that particular stone is gone.

More about the shop →  ·  How the work gets done →

Shipping

Ships from Lewiston, Idaho to anywhere in the US and Canada. Flat-rate shipping is $7. Shipping is free on orders over $100.

Every order ships the one stone in the listing photo. There’s no warehouse and no second copy out back.

Ask about a piece

Have a question about a stone? Call or send a message through the shop.

208-400-1427

Message through the shop →

Asking about a particular piece? Include its shop link so I can pull up the exact one you mean.

The Work

Every piece in this shop started as a rough rock. I find the stone, cut it, grind it, polish it, and if it becomes a necklace, I set it myself. Nothing here is mass-produced and nothing is exactly repeatable — two cuts from the same rock can show two different patterns.

First

The cut

Cutting is the decision. Once the saw goes through, you can’t put it back. I cut to show the best face the stone has, and sometimes the stone disagrees with me.

Second

The polish

Grinding and polishing is the slow part. That’s where the color and the banding come up, and the stone starts looking like what it was hiding.

Last

The setting

When a piece becomes a necklace, I set it myself. When it’s a slab or a tower, it stands on its own. Either way, when it sells, that stone is gone. There isn’t a second one.

No production line. One bench, one saw, one pair of hands — and a stone that only ever comes out this way once.

Shop the finished pieces

About

I’m the lapidary behind Silver Queen Stoneworks in Lewiston, Idaho. I find the rough stone, cut it, and polish it myself. When a stone becomes a necklace, I set it myself, too. Two cuts from the same rock can reveal different patterns. When a piece sells, that particular stone is gone.

I cut rocks in Lewiston, Idaho. Sometimes I get it right. The stones on this site are the ones that came off my bench — photographed as themselves, priced plain, and gone the moment somebody takes one home.

No crystal talk here. A stone is good because of what’s in it — the banding, the color, the face it shows when you turn it in the light. That’s the whole pitch.

Silver Queen Stoneworks is a one-man shop in Lewiston, Idaho. The stones are real, the work is mine, and when a piece is gone, it’s gone.

See what’s on the shelf

Questions

The plain answers, up front. Anything else, call and ask — you’ll get me.

Yes. Each stone is cut and finished by hand, and no two stones come out the same. When a piece sells, that exact stone is gone.

Flat rate $7 anywhere in the US and Canada. Orders over $100 ship free.

Not the same stone. I can cut a similar stone when I have the rough, but it will have its own pattern. Ask me and I’ll tell you straight whether I can get close.

Yes. Call 208-400-1427 or use the contact form at the shop. You’ll get me.

Back to the stones

From the Bench

From the bench — the stones I’m arguing with, and what I did about them.

What do you see in this band?

This is a Brazilian agate slab, cut and polished here in the shop. Held up to the light, the banding runs all the way through it — cream, amber, and a line I keep coming back to. This one isn’t a cut decision. It’s already cut, already done, and it’s in the shop. I just want to know what you see in it. Look close first. Then look at the whole stone.

Close view of the Brazilian agate slab — amber banding around a broad cream center, held in hand
Close first — the banding and the cream center.
The whole Brazilian agate slab held up to the light, dark rind tracing the edge of the original stone
Now the whole stone — the dark rind is the outside of the original rock.

See this slab in the shop — $15

Cut It or Keep It?

Every so often a rough stone lands on the bench and the call isn’t obvious — a band disappearing around the back, a fracture, a face I’d hate to lose. Would you cut this rock, or leave the damn thing alone?

When one of those comes up, I’ll put it here and on the shop’s Facebook page. You pick a side. Then I show what I actually did and why — even if I overruled everybody, and even if the cut was a dud. You get a vote, not a saw.